up to 1,093°C / 2,000°F

Our SI Header Wrap is made from silica filament yarn making this SI Header Wrap is strong and flexible while operating at its designed operating temperature of 1,093°C / 2,000°F continuous and 1,648°C / 3,000°F intermittent. It will sustain the extreme high temperatures that your glowing pipes from the turbo, down pipe, header, manifold or racing applications require. Simply put, there is not an insulating header wrap on the market that will take higher temperatures and last longer. You can actually wrap the header with SI Header Wrap, run it, heat it up, and then unwrap it our SI Header Wrap from the header when needed. Wrap around or "coil" SI Header Wrap around your exhaust pipe, using a overlap to hold itself in place use our Stainless Steel Ties, hose clamps, or stainless steel wire to secure ends in place.

Our SI Header Wrap is asbestos free and is made from a base high quality silica yarn. It is noncombustible, it is also water and fungus resistant. Always wear gloves, safety glasses and dust mask when handling this product, long sleeves are also recommended.

  • Rated for 1,093°C / 2,000°F continuous use, 1,648°C / 3,000°F intermittent
  • SI Header Wrap reduces under bonnet temperatures up to 50%
  • SI Header Wrap increases horsepower / kilowatts
  • Great turbo manifold header wrap
  • SI Header Wrap rolls are 1.59mm thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling SI Header Wrap
  • SI Header Wrap is made in the USA
  • This product is available in:- 25mm = 1" or 50mm = 2" ( Wider Wraps are available on request ).

Our standard roll lengths are: -
6m or 20ft lengths
7.5m or 25ft lengths
15m or 50ft lengths
30m or 100ft lengths  -  Not available in 50mm or 2" 

The Preferred SI Header Wrap Overlap is 6mm is recommended for high performance and racing applications, a 50% overlap is recommended for most stock applications.

2 Item(s)

per page

2 Item(s)

per page