up to 816°C / 1,500°F

VOLCANO ROCK HEADER WRAP is engineered for protection against gasoline and engine chemicals and withstands temperatures up to 816°C / 1,500°F. When wrapped around exhaust pipes, the unique construction creates attractive and durable finished. Volcano Rock Header Wrap is 25% stronger than the Exhaust Header Wrap and provides a 148°C / 300°F increase in temperature protection over fiberglass wrap. Volcano Header Wrap can lower under bonnet temperatures by as much as 50%. Lowering under bonnet temperatures mean lower intake temperatures, that means more horsepower and better fuel efficiency. By wrapping your exhaust will maintains hotter exhaust gases, decreases the gas density, and that allows the exhaust gas to exit the system faster! Increased exhaust scavenging is produced helping to lower intake temperatures by literally pulling them through the cycle faster: that equals more horsepower. Volcano Header Wrap also keeps heat out of the drivers compartment and reduces heat damage to other components. Our volcano header wrap features a texturized carbon fiber look coating which makes it capable of withstanding 816°C / 1,500°F continuous. Wrap around or "coil" the Volcano Header Wrap around your exhaust pipe, using a overlap to hold itself in place use our Stainless Steel Ties, hose clamps, or stainless steel wire to secure ends in place. Our volcano header wrap is asbestos free and is made from continuous filament basalt fiber yarn. It is also water and fungus resistant. Always wear gloves, safety glasses and dust mask when handling this product, long sleeves are also recommended.

   

  • Rated for 816°C / 1,500°F continuous
  • Exhaust header wrap reduces under bonnet temperatures up to 50%
  • Exhaust header wrap Increases horsepower / kilowatts
  • All rolls of exhaust header wrap are 1.59mm thick
  • Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling Volcano Header Wrap
  • Volcano Header Wrap is made in the USA
  • This product is available in:- 25mm = 1" or 50mm = 2" ( Wider Wraps are available on request ).

 

Our standard roll lengths are: -
7.5m or 25ft lengths
15m or 50ft lengths
30m or 100ft lengths

The Preferred Volcano Header Wrap Overlap is 6mm is recommended for high performance and racing applications, a 50% overlap is recommended for most stock applications.

2 Item(s)

per page

2 Item(s)

per page